| Model |
DL41 |
|
 Performance and Structure
|
| Water evaporation rate |
Max. approx. 3,000 ml/h |
| Spraying system |
Two-liquid nozzle system (Dia. of orifice : 0.7mm) |
| Spray/hot air contact system |
Downward spray parallel flow system |
| Sample liquid feed pump |
Quantitative peristaltic pump, flow rate variable up to 80ml/h. |
| Aspirator |
Bypass-type commutator blower, air flow rate variable up to 1m3/min. |
| Temperature control |
Temperature control by thyristor, temperature control range : 40°C to 300°C |
| Heating source |
Stainless steel pipe heater (2.0kW×2pcs.) |
| Drying chamber dimensions (mm) |
450 (Dia.)×1,000 (H) (Glass part) |
| Material |
Drying chamber, cyclone, product vessel : Super hard borosilicate glass (other tubes are made of stainless steel and silicone rubber hose) |
| Additional operating features of the nozzle |
Automatic orifice clean out (needle knocker), clean out of any powder adhered to the tip (nozzle blower) |
| Additional operating features of the body |
Automatic raising and lowering of the head (for washing of the drying chamber and hot air blower)
|
| Instrumentation |
Control function : Inlet temperature, hot air flow, sample pump feed quantity, atomizing air pressure, orifice clean out time.
Meter : Temperature recorder of inlet and outlet temperatures, dry air flow meter, atomizing air pressure gauge. |
| Standard |
| Power source (50/60Hz) |
AC 200/220V, single phase
25A/23A |
| External dimensions (W×D×Hmm) |
1,060×880×1,750 |
| Weight |
Approx. 180kg |
| Accessories |
| Pump tube |
6.4(O.D.)mm×3.2(l.D.)mm x 2(L)m 2pcs. |
| Air hose |
7.9(l.D.)mm×3(L)m 1pc. |
| Exhaust duct |
50(l.D.)mm×3(L)m 1pc. |
