|
Contact person： Mr.Hu
Tel: 0411-87300505
Fax:0411-87305556
Mobile: 13940906200
E-mail: fenghu@chjtech.com
Factory Address:
NO.5,HuaiheRiverthreegroups,
Economicdevelopmentzone,Dalian
|
|
|
|
|
| Versatility Type GA32 |
| |
 |
|
A small sized dryer for laboratory use which produces uniformalized fine particles.
The GA32 is a compact spray dryer using a spray dry method which enables simple use for laboratory experiments. It can be used for a wide variety of drying operations, from preliminary examinations for pilot plants to drying operation in general laboratories.
Features:
- No danger of damaging foodstuffs, medical products and products that are sensitive to biochemical-heat.
- No oxidation takes place and the water content of the formed powders is low, so that there is no contamination.
- Even a solid body of ca.0.5g can be dried.
|
|
Control panel:
Inlet temperature, outlet temperature and drying air volume are displayed digitally. Condition setting dials and stage level control switch are located on the front panel for easy use. |
|
In this Spray Dryer, the sample are dried and transformed into a uniform fine powder of amorphous form, so both its solubility and reactivity are extremely high in comparison to crystal
|
Specifications:
| Model |
GB22 (Basic Unit) |
 Structure |
| Heater |
2 kW |
| Aspirator |
Bypass-type blower |
| Sample liquid feed pump |
Quantitative peristaltic pump, flow rate variable up to 28握/min. |
| Stirring system |
Using an induction motor |
| Compressed air blowing system |
Pulse jet system, an electromagnetic valve and electronic timer |
| Temperature control range |
40°C to 200°C |
| Temperature control accuracy |
±1°C |
| Temperature setting and display method |
Digital |
| Dry air flow meter |
Digital display |
| Spray pressure gauge |
Bourdon tube pressure gauge,
measuring range : 0 to 0.3MPa (0 to 3kg/cm2) |
| Standard |
| Power source (50/60Hz) |
AC 200/220V, single phase
14A/12.7A |
| External dimensions (W×D×Hmm) |
760×420×1,345 |
| Weight |
Approx. 110kg |
|
|
|
|
|
|
