|
Contact person： Mr.Hu
Tel: 0411-87300505
Fax:0411-87305556
Mobile: 13940906200
E-mail: fenghu@chjtech.com
Factory Address:
NO.5,HuaiheRiverthreegroups,
Economicdevelopmentzone,Dalian
|
|
|
|
|
| Vertical type LCD Batch Aging System YY-307WAV-R |
| |
| |
YY-307WAV-R |
This system is the vertical type LCD module aging chamber used for quality control and quality assurance processes. The system is composed of a control panel and thermostatic chambers with built-in LCD module driver circuits.
To manage a variety of LCD modules, additional computerized control systems are available upon request as options.
Features:
- Front drawer type loading system for setting LCD modules,facilitating feeding, Discharging and inspection modules.
- The aging system in designed for saving space and maximizing workability.
- Equipped with complete safety devices, Earth leakage breaker, blower, heater burn out, Upper limit temperature alarm, external indicator lamp, heat sensor etc.
|
Specifications:
| Model |
YY-307WAV-R |
 Performance |
| Circulation method |
Forced hot air circulation with heating control of the heater |
| Operating temperature range |
40°C-80°C |
| Temperature control accuracy |
± 1.0°C (at 80°C) |
| Temperature uniformity |
± 5°C (at 80°C) |
| Configuration |
| External material |
Cold-rolled steel plate, Melamine resin backing finish |
| Internal material |
Stainless steel plate |
| Heat insulating material |
Glass wool |
| Heater |
Stainless pipe heater |
| Fan |
Aluminum sirocco fan with motor |
| Instruments |
| Temperature controller |
Electronic temperature programmable controller PID control,
Digital setting and Digital indication |
| Timer |
Digital setting system, Arbitrarily set with in the range from 0.1s to 9,9990H
(Provided with auto start/ stop function) |
| Temperature sensor |
K-type thermocouple, double-sensor (One sensor is provided for overheat protector) |
| Safety features |
| Short circuit breaker |
Protects the machine from leakage |
| Overheating protection |
At overheat, the power supply for the heaters shall be cut off |
| Temperature upper limit alarm |
Excessive temperature rise prevention circuit incorporated protected in temperature controller.
When the temperature has reached the specified upper limit, the power supply for the heaters shall be cut off. |
| Protecting circuit for fan motor |
When the motor is overloaded, the power supply for the heaters and that for the motor shall be cut off. |
| Error indication |
When any of the error has occurred, the alarm buzzer shall sound and each warning shall be displayed on the operation panel. |
| Required Utility |
| Electric power supply |
AC200/208/220 V Single phase 50/60Hz |
|
| |
|
|
|
|
